Piece parquet. Methods of laying and fixing

Parquet has been a leader among various floor covering materials for many years. Its laying is not an easy process, you need to know some nuances.
The parquet is made of a wood base, therefore it requires special care and careful attitude. High humidity in the room can lead to swelling of the coating, and low humidity can lead to drying out and the formation of cracks and cracks.
The most popular styling options
1. Christmas tree. With this method, the parquet slats are laid at an angle of 90 degrees. The next row is stacked in the opposite direction. The angle between the walls and the slats should be 45 degrees. This installation distributes the load evenly, so the possibility of cracks is minimal. The most optimal and stable way.
2. Straight square or flip-flops. The type of laying in squares. If you do everything according to the rules, then the coating will turn out to be very durable. Laying begins with a right angle, then squares are formed by intertwining transverse and longitudinal slats.
3. The deck. The slats shift by a third or half in relation to the previous ones, forming a kind of pattern. However, this option is not stable. In case of temperature fluctuations, the coating can easily deform.
The stages of installation
The parquet is laid after all the finishing work is completed.
– surface preparation for installation;
– parquet flooring and fixing to the base;
– shavings;
– varnish coating;
– installation of baseboards.
Styling methods
1. Floating. The parquet is laid without fastening to the base with a key system on the rails. With this method of laying, damaged areas are easily replaced.
2. Fixation with an adhesive compound. The adhesive is selected depending on the base material. The adhesive adhesion will be higher if the base is pre-primed.
How to glue parquet
The base must be dry, free of debris and dirt and smooth. Cracks on the concrete surface must be repaired. It is necessary to make sure that the parquet planks are pressed tightly against the floor.
The glue is applied evenly to the base and then the piece parquet is laid. For the purpose of reliable fixation, the parquet is not touched for a day. However, in order to exclude non-glued places, a few hours after laying, you need to walk across the parquet and knock on the dies with a hammer. If an empty area is found, it needs to be pressed down with something heavy.
The parquet floor fits perfectly into any design and gives the room a special appeal. Despite the fact that the laying process is quite laborious, the result is worth it. Best slots and honest online casino rating